Fronius AccuPocket 150/400 TIG, Operating Instructions Manual

Page: 72 / 88

Warning notices
inside the device
An electric shock can be fatal. Do not open the device!
The housing must never be opened by anyone other than a Fronius-trained ser-
vice engineer. The device must be disconnected from the mains before starting
any work with the housing open. A suitable measuring instrument must be used
to ensure that electrically charged components (e.g. capacitors) are fully dis-
charged. Ensure that the device remains disconnected from the mains until all
work has been completed.
Entladezeit > 5 sek.
Discharge time > 5 sec.
Temps de décharge > 5 s
This warning sign is located inside the
device. It must NOT be removed or
painted over.
The discharge time of the capacitors is
approx. one minute.
Intended use
The charger is designed to charge the power sources listed below. Any use above
and beyond this purpose is deemed improper. The manufacturer shall not be li-
able for any damage resulting from such use. Proper use also includes:
- Carefully reading these Operating Instructions
- Following all the instructions and safety rules in these Operating Instruc-
tions
WARNING!
Charging any other devices can cause serious injury or damage, and is therefore
prohibited.
The following power sources may be charged:
- Fronius AccuPocket 150/400
- Fronius AccuPocket 150/400 TIG
- Fronius Ignis 150 B /750
The charger is intended solely for commercial use.
72