General
Warning notices
on the device
A number of safety symbols can be seen on the charger's rating plate. The safety
symbols must not be removed or painted over.
xxxxxxxx
xxxxxxxx
4,010,341,xxx
In:
ActiveCharger 1000/230V
~230V 50/60Hz; 1100W
DC 58V/18A
A-4600 Wels
www.fronius.com
Protective class I
Out
MAX
:
IP
4
3
S
Chr. No.
Part No.
EMC Emission
Class A
Do not use the functions described here until you have fully read and understood
the following documents:
-
these operating instructions
-
all the operating instructions for the system components of the power
source, especially the safety rules
Possible sources of ignition, such as fire, sparks and naked flames, must be kept
away from the battery.
Ensure an adequate supply of fresh air during charging. Maintain a distance of at
least 0.5 m (19.69 in.) between battery and charger during the charging proced-
ure.
Do not dispose of used devices with domestic waste. Dispose of them according
to the safety rules.
71
EN
Summary of Contents for AccuPocket 150/400 TIG
