Fronius 4,044,008, Operating Instructions Manual

Page: 111 / 136

111
EN
Removing cool-
ant stops
Place the bit insert for coolant stops (1)
onto the manual torque wrench (2)
Unscrew coolant stops (3) from the
torch body coupling using the manual
torque wrench
Preparing new
coolant stops
Insert the 6 x 1.5 mm O-ring into the
groove (1) on the inside of the coupling
crown
(1)
(2)
1
(3) (3)
NOTE! Push the bit insert on the
manual torque wrench as far as it
will go into the coolant stops.
2
(1)
1