Fromm FS380, Use And Maintenance Manual, Page: 98 / 100

92
Rev.2 01/03/2021
Use and Maintenance Manual | TURNTABLE - MAST
92
8 OUT OF SERVICE
8.1 DISMANTLING, SCRAPPING AND
DISPOSAL
8.2 DISMANTLING ELECTRONIC PARTS (WEEE
DIRECTIVE)
DANGER
IF THE MACHINE OR ITS COMPONENTS ARE FOUND TO BE NO
LONGER SERVICEABLE OR REPAIRABLE BECAUSE THEY ARE BROKEN,
WORN OR HAVE COME TO THE END OF THEIR WORKING LIFE, THEY
MUST BE DEMOLISHED.
- Demolition must be carried out using suitable equipment, chosen
on the basis of the type of material in question.
- All components must be dismantled and scrapped after being broken
down into smaller parts, so that none of them can reasonably be
used again.
- When the machine is scrapped, its parts must be disposed of in
a differentiated manner, taking into account their different types
(metal, oil and lubricants, plastic, rubber, etc..) handing them over
to collection centres authorised for such purposes and in any case
conforming to the applicable laws in force governing the disposal of
solid industrial waste.
DANGER
NEVER TRY TO RE-USE MACHINE PARTS OR COMPONENTS THAT
MAY STILL APPEAR INTACT ONCE THEY HAVE BEEN DECLARED NO
LONGER SERVICEABLE.
La directive communautaire 2012/19/UE (DEEE) impose aux fabricants
et aux utilisateurs d’équipements électriques et électroniques une
série d’obligations en matière de collecte, de traitement, de récupération
et d’élimination de ces déchets.
Il est recommandé de respecter scrupuleusement ces normes pour
l’élimination de ces types de déchet. Il est rappelé que l’élimination
de ces déchets entraîne l’application des sanctions administratives
prévues par la législation en vigueur.