manualshive.com logo in svg

Fromm FS380, Use And Maintenance Manual, Page: 92 / 100

Share
Download
Fromm FS380 Use And Maintenance Manual Download Page 92

86

Rev.2  01/03/2021

Use and Maintenance Manual | TURNTABLE - MAST

86

7.1.1 

SPECIAL PRECAUTIONS

7.1.2 

CLEANING

7.2 

SCHEDULED MAINTENANCE

When  performing  maintenance  or  repair  operations,  observe  the 

following:

 

-

Before starting work, post a sign “MACHINE UNDER MAINTENANCE” 

in a well visible position.

 

-

Do not use solvents or flammable materials.

 

-

Take care not to pollute the environment with cooling lubricants.

 

-

Use suitable equipment to access the upper parts of the machine.

 

-

Do not climb onto machine components or guards, as they have not 

been designed to support the weight of a person.

 

-

After  completing  the  maintenance  operations,  refit  and  properly 

secure all the protection devices and safety guards that have been 

removed or opened.

Periodically clean the safety guards, particularly the transparent 

material of the casing, using a damp cloth. 

This paragraph describes the operations to be carried out periodically 

in order to ensure proper functioning of the machine.

WARNING

IT IS ESSENTIAL TO SCRUPULOUSLY OBSERVE THE MAINTENANCE 

OPERATIONS DESCRIBED BELOW IN ORDER TO MAKE THE MACHINE 

MORE EFFICIENT AND ENSURE A LONGER LIFE.

INFORMATION

IF  MACHINE  MAINTENANCE  IS  NOT  CARRIED  OUT  IN  COMPLIANCE 

WITH THE INSTRUCTIONS PROVIDED, THE MANUFATURER IS RELIEVED 

OF ALL RESPONSIBILITY FOR MALFUNCTIONING OF THE MACHINE.

Summary of Contents for FS380





































































































Reviews:

No comments