Fromm FS380, Use And Maintenance Manual, Page: 32 / 100

26
Rev.2 01/03/2021
Use and Maintenance Manual | TURNTABLE - MAST
26
3.2.2.2 CARRIAGE GUIDE (ROLL CONTAINER)
This device helps guide and maintain position during “roll container”
carriage wrapping (1) .
It is made up of two guides (2) attached to the plate that hold the
carriage wheels on the side and a system (3) that blocks their exit
during rotation of the turntable.
A) The operator pushing the carriage along the guides (2) until it
reaches the system (3) .
B) Hook the stretch film and start the cycle.
C) Once the wrapping cycle is complete, cut the stretch film and
remove the carriage from the guides (2) .
WARNING
Using this system requires a very low rotation speed of the
turntable (4) and a very low film tension to prevent the carriage
(1) from escaping from the guides (2).
1
2
4 3
Picture 15