7
a383man.en
7
OPERATING CONTROLS
8
OPERATION
8.1
Feeding the strap around the
package
The strap is fed arround the package in the direction
as shown in the illustration. The end of the strap is
held tightly with the left hand and pulled firmly
towards the operator with the right hand.
8.2
Loading the strap
Lift and hold the flapper valve lever with the index
finger of the right hand. The left hand inserts the two
straps lying precisely upon another into the tool until
they hit the strap stops. The lower strap end must
slightly protrude the end of the base plate. Release
the flapper valve lever - the flapper closes and the
feed wheel is lowered to the strap.
Flapper valve lever
Sealing valve lever
Motor valve lever
Lever
Always wear safety
glasses with side
shields which conform
to ANSI Standard
Z87.1.
When handling strap,
always wear
protective gloves.
WWW.TRADITIONALTOOL.COM
For Parts & Service 1-877-862-6699