8
A383 microlock man
8.3
Tensioning the strap
The motor valve lever is pressed down with the
thumb of the right hand so that the catch locks.
Let the tool tension until the motor stalls.
If the tensioning cycle has to be interrupted (faulty
strapping, applying of corner protection angles) press
the red lever.
8.4
Sealing the strap
Hold the strap which is reeled off from the strap
coil with the left hand.
Press and hold down the sealing valve lever until
the strap is cut off.
Release the sealing valve lever.
8.5
Removing the tool from the
tensioned strap
Hold the cut strap end firmly with your left hand.
Lift the flapper valve lever with the right hand and
push the tool hard to the right from the tensioned
strap.
Release the flapper valve lever.
For Parts & Service 1-877-862-6699
WWW.TRADITIONALTOOL.COM
