Assembly | 6
M2250322_en | Installation instructions Wood chip boiler T4e 200-350
39
r
Remove both pipe sections and ball valves, seal line regulating valve instead
Ä
IMPORTANT: Pay attention to direction of flow. The arrow (A) must point
downward.
r
Remove the perforations (A) on the lower cover plate
Ä
Remove the burrs with a half-round file
r
Install the lower cover plate on the line regulating valves
r
Install rear cover plate on the return
6.3.4 Installing line regulating valve (T4e 300-350)
Depending on the delivery condition of the boiler, the line regulating valves may already
be installed. This eliminates the following assembly steps.
r
Removing the back panel below the boiler’s return flow line
r
Removing both pipe sections and ball valves
