5 | Parameters overview
22
B0640421_en | Operating instructions Control Panel RBG 3200
Buffer tank bottom temperature
Display of the current temperature in the lower part of the buffer tank.
Buffer tank pump control
Display of the current speed of the buffer loading pump.
Buffer tank charge
Prerequisite:
Master boiler in the cascade or hydraulic system 4 or fuel amount calculation
Display of the current buffer tank charge.
5.4.2 Buffer tank - Temperatures
Basic display
Buffer tank
Buffer tank 01
Temperatures
Heating circuit release from following buffer tank temperature
Temperature value which must be reached to release the heating circuit pumps in the top part
of the buffer tank.
NOTICE! This parameter applies for all available heating circuits!
5.5 Boiler 2
5.5.1 Boiler 2 - Status
Basic display
Boiler 2
State
Temperature of secondary boiler
Display of the current boiler temperature of the secondary boiler.
Burner relay status
Shows the current status of the burner relay:
▪
0:
Secondary boiler not active
▪
1:
Secondary boiler active
Standby boiler pump
Prerequisite:
“
Switch valve installed
” parameter set to “NO”
Display of the current pump control for the standby boiler.
Standby boiler switch valve
Prerequisite:
“
Switch valve installed
” parameter set to “YES”
Display of the current switch valve control of the standby boiler.
