Operating the system | 4
B1300122_en | Operating instructions Lambdamat LM 800-1000
25
4.2.3 Blowing in fuel for a partially emptied store with rotary agitator
If there is still sufficient fuel in the fuel store (the rotary agitator head is completely
covered with fuel and the rotary agitator arms / spring blades are not extended), the fuel
store can be filled as follows:
r
Switch off the boiler by tapping “Boiler off” at the mode icon and allow to cool for at
least two hours
r
Close all openings to the store to seal out dust
r
Blow the fuel into the fuel store
4.2.4 Blowing in fuel for an empty store with rotary agitator
If the rotary agitator head is already free from material and the rotary agitator arms /
spring blades are extended, they should be covered with the remaining fuel in the fuel
store and retracted. This should be done well before the agreed loading time.
