Plaza Collection Table/Bench
TOOLS REQUIRED: POWERED DRIVER & 1/2” SOCKET
(9) 2” x 4” x 41” PLASTIC SLATS
(2) STEEL TABLE ENDS
(2) STEEL SUPPORT CHANNEL STRAPS
(34) 5/16” SS HEX LAG SCREWS
(2) 2” x 6” x 41” ROUND NOSE PLASTIC SLATS
klklkl
-Check materials list to verify all items have been
shipped. Extra hardware may be included
-Assembly will require two people.
-Assemble the table on a flat and level surface.
Picture A
Assembly Instructions
(34) 5/16” SS FLAT WASHERS
(4) 5/16-18 x 1” SS PHILLIPS HEAD BOLTS
(4) 5/16” SS LOCK WASHERS
(4) 5/16-18 SS HEX NUTS
PLEASE NOTE BEFORE ASSEMBLY
Step 1.
Lay the steel support channel face down
and place one steel support strap perpendicular
to and in the center of the support channel. The
flat side of the straps will be facing up. See Picture
‘A’. Ensure the center attachment holes line up
with each piece. Loosely attach each strap to the
support channel with 5/16-18 Phillips head bolts,
lock washers and hex nuts as shown in Picture ‘B.
Finger tighten only.
Picture B
PHILLIPS HEAD BIT
1/2” WRENCH
(1) STEEL SUPPORT CHANNEL
01/2017
Page 1 of 3
