M A D E I N I T A L Y
R
F
M
B
I
K
E
DROPPER SEATPOST OBI1
Hold the seatpost with one hand and with the
other, insert the end of the already assem-
bled cable into the sleeve located near the
seat collar. (Before inserting the cable into
the sleeve, place the ferrule provided in the
box.).
(06)
Slide the seatpost into the frame without
pushing or turning it. If this is not possible,
unturn the seatpost locking screw.
Make sure the housing fits properly into the
slot on the underside of the seat post actua-
tor housing.
(07)
Position the seat post at the desired height
and secure it by tightening the seat post
clamp screw. (check the tightening torque).
Then insert the metal curve with register in
the remote control.
(08)
Insert the seat post cable into the metal hous-
ing and hole of the remote control.
(09)
Tension the cable and tighten the grub screw.
(10)
Cut the cable and install the cable end
cap.
If necessary, slightly unscrew the adjuster in
order to increase the cable tension.
Max. 300mm
Mín. 200mm
Mín. 90mm
Max. 190mm
06
06
07
08
09
10