FRIULAIR PURESTREAM CHILLERS CWE-Q 041, Use And Maintenance Manual

Page: 38 / 44

32
7425MUM753 Model: CWE-Q - Use and Maintenance Manual Rev. 15
11
D
ISMANTLING
T
HE
C
HILLER
If the chiller is being dismantled, you must separate it into parts of homogeneous
material.
The following table lists the main materials of the various components of the
machine.
Part Material
Refrigerant fluid R410A, Oil
Panelling and supports Carbon steel, epoxy paint
Chiller compressor Steel, Copper, Aluminium, Oil
Heat-exchanger (evaporator) Steel, Copper
Condenser Aluminium, Carbon Steel
Pipe Copper
Fan Aluminium, Copper, Steel
Valve Steel, Bronze
Insulation Synthetic rubber without CFC, EPS, Polyurethane
Electrical wires Copper, PVC
Electrical parts PVC, Copper, Bronze
We recommend that you follow current safety norms for the disposal of each single material.
The refrigerant contains particles of lubrication oil from the chiller compressor.
Dispose of refrigerant properly. Remove it from the chiller with suitable tools
and deliver it to authorised collection centres that will treat it and make it
reusable.