Fritz! FRITZ!Box 7570 Installation, Configuration & Operation Download Page 55

Page: 55 / 165

USB Hub

FRITZ!Box Fon WLAN 7570 vDSL

Insert the your stick into the USB port on the
FRITZ!Box.

The WLAN security settings are transmitted automati-
cally to the FRITZ!WLAN USB Stick. The “INFO” LED on
the FRITZ!Box begins flashing rapidly.

As soon as the “INFO” LED stops flashing, transmis-
sion of the settings has been concluded.

Remove the FRITZ!WLAN USB Stick from the device.

After the security settings have been transmitted auto-
matically, you can insert the FRITZ!WLAN USB Stick in
a computer.

Now the FRITZ!WLAN USB Stick is ready to establish a con-
nection to the FRITZ!Box. No further settings are necessary.

8.7

USB Hub

A USB hub can be connected to the USB host controller. A
USB hub is a device to extend existing USB ports.

You can connect two USB mass storage devices and one
USB printer, or three USB mass storage devices (like a hard
drive or memory stick) to the USB hub.

We strongly advise to use a USB hub with its own power
supply.

Summary of Contents for FRITZ!Box 7570






































































































































































Search results

Summary of Contents for FRITZ!Box 7570

Reviews:

Related manuals for FRITZ!Box 7570

Brands by name

Popular brands

Fritz! FRITZ!Box 7570, Installation, Configuration & Operation

Search results

Summary of Contents for FRITZ!Box 7570

Reviews:

Related manuals for FRITZ!Box 7570

Brands by name

Popular brands