Fritz! FRITZ!Box 7570 Installation, Configuration & Operation Download Page 138

Page: 138 / 165

FRITZ!Box Fon WLAN 7570 vDSL

138

Changing the DHCP Server Settings

In the case of the preset IP address of the FRITZ!Box, the fol-
lowing IP addresses are available for assignment to the
computers:

Each IP address can be assigned only once.

Changing the DHCP Server Settings

Proceed as follows to open the DHCP server settings:

Start a web browser on your computer.

Enter

fritz.box

in the address line of the browser.

Select the “Advanced Settings / System” menu in the
“Settings” area.

Click “Expert Mode” in the “System” menu, enable the
setting “Show expert settings” and confirm this set-
ting by clicking “Apply”.

Open the “System / Network Settings” menu.

Click the “IP Addresses” button.

The “IP Settings” page is opened. Here you can make the
settings for the DHCP server.

3.3

Subnetwork

By default the option “All computers are located in the
same IP network” is enabled in the FRITZ!Box.

If the factory settings were not changed, this setting has the
following effect:

192.168.178.2 - 192.168.178.253

Factory Settings

All computers are located in the
same IP network

enabled

IP address

192.168.178.1

Subnet mask

255.255.255.0

DHCP server

enabled

Summary of Contents for FRITZ!Box 7570






































































































































































Search results

Summary of Contents for FRITZ!Box 7570

Reviews:

Related manuals for FRITZ!Box 7570

Brands by name

Popular brands

Fritz! FRITZ!Box 7570, Installation, Configuration & Operation

Search results

Summary of Contents for FRITZ!Box 7570

Reviews:

Related manuals for FRITZ!Box 7570

Brands by name

Popular brands