manualshive.com logo in svg

Fritz! Fon WLAN 7390, Installation, Configuration And Operation

The Fritz! Fon WLAN 7390 is a versatile and user-friendly telephony system that offers seamless installation, configuration, and operation. To help you make the most of its features, we provide a comprehensive manual that you can easily download for free from our website.

Share
Download
background image

Ruling Out Interference Caused by Other Wireless Networks

113

Ruling Out Interference Caused by Other Wireless 
Networks

If there are other devices in the immediate vicinity of your 
FRITZ!Box that use the same frequency band, simultane-
ous use of frequencies can result in mutual interference 
(for example, fluctuations or interrupted connections). 
Disruptions can be caused by other WLAN access points, 
but also by devices like baby monitors, game consoles, 
garage door openers, Bluetooth devices, or wireless AV 
bridges, which also use the 2.4-GHz frequency band. In 
this case, please test a different radio channel for your 
FRITZ!Box.

Alternatively, you can set the radio channel to “Auto”. This 
enables the Autochannel function, so that the 
FRITZ!Box searches for the best WLAN channel itself.

For applications that rely on a steady, high throughput 
rate (“streaming”), you should use the 5-GHz frequency 
band. This radio band provides more channels and is sub-
ject to significantly less external interference.

To set the radio channel in the user interface, your com-
puter must be connected with the FRITZ!Box by network 
cable or wirelessly. If your computer is connected via 
WLAN, continue with Step 2 of the instructions below. In 
this case, note that the existing WLAN connection must be 
interrupted and then established again if you change the 
radio channel in the frequency band currently in use. If 
your WLAN adapter can also work in both the 2.4-GHz and 
5-GHz frequency bands, you can skip this step by estab-
lishing a wireless network between the computer and the 
FRITZ!Box in the other frequency band before changing 
this setting.

1.

Connect the FRITZ!Box to a computer using a network 
cable. Proceed as described in the section “Connect-
ing Computers to the LAN Port” on page 16.

2.

Start a web browser.

3.

Enter 

fritz.box

 in the address field.

Summary of Contents for Fon WLAN 7390






































































































































































































Reviews:

No comments

Related manuals for Fon WLAN 7390

B+B SmartWorx CR10 v2 Start Manual preview
CR10 v2
Brand: B+B SmartWorx Pages: 4
QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Brand: QTech Pages: 120
Salusfin SF-930EU User'S Installation Manual preview
SF-930EU
Brand: Salusfin Pages: 6
Ubiquiti ER-4 Quick Start Manuals preview
ER-4
Brand: Ubiquiti Pages: 22
Ubiquiti UniFi UAP-AC-LR Quick Start Manual preview
UniFi UAP-AC-LR
Brand: Ubiquiti Pages: 28
NETGEAR RAXE500 User Manual preview
RAXE500
Brand: NETGEAR Pages: 169
NETGEAR AC1450 Installation Manual preview
AC1450
Brand: NETGEAR Pages: 14
Belkin F5D5230 Quick Setup Manual preview
F5D5230
Brand: Belkin Pages: 2
ANEP P4GU VoLTE Technical Data Sheet preview
P4GU VoLTE
Brand: ANEP Pages: 48
Waver WAC52N Quick Start Manual preview
WAC52N
Brand: Waver Pages: 36
Moxa Technologies IKS-6728 Series Hardware Installation Manual preview
IKS-6728 Series
Brand: Moxa Technologies Pages: 8
Synology DiskStation Series Upgrade Installation Instructions preview
DiskStation Series
Brand: Synology Pages: 6
H3C LS-5100-16P-SI-OVS-H3 Configuration preview
LS-5100-16P-SI-OVS-H3
Brand: H3C Pages: 313
peplink Balance 380 User Manual preview
Balance 380
Brand: peplink Pages: 111
Planet GS-4210-16P2S User Manual preview
GS-4210-16P2S
Brand: Planet Pages: 431
WAVESYS WSIL-1204-GT2-SFP2 Hardware User Manual preview
WSIL-1204-GT2-SFP2
Brand: WAVESYS Pages: 21
NetApp StorageGRID Webscale SG5700 Series Install preview
StorageGRID Webscale SG5700 Series
Brand: NetApp Pages: 15
D-Link DSN-1100 Quick Start Manual preview
DSN-1100
Brand: D-Link Pages: 2

Brands by name

Popular brands

Load more brands