FRITZ!Fon MT-D
40
Configuring the Baby Monitor
FRITZ!Fon C4
40
8
Configuring the Baby Monitor
If your FRITZ!Fon is registered with a FRITZ!Box, you can configure the
FRITZ!Fon as a baby monitor.
FRITZ!Fon will then call a specified telephone number whenever the
ambient noise reaches a defined level.
1.
Press the menu key
.
2.
Select “Supplementary services / OK / Baby monitor / OK /
Destination no. / OK”.
3.
Enter a telephone number and press “OK”.
or
Delete all of the numerals already entered. Press the display
key “Options” and select “Telephone book / OK”. Select a tele-
phone book entry and press “OK”.
or
Delete all of the numerals already entered. Press the display
key “Options” and select “Internal call / OK”. Select a tele-
phone and then press “OK”.
4.
Select “Activation / OK”.
5.
Press “Options”, select a sensitivity level, and press “OK”. The
higher the sensitivity, the less the ambient noise needed to
trigger a call.
FRITZ!Fon is configured. “Baby monitor enabled” is shown on the dis-
play. Now you can place the FRITZ!Fon near the sleeping child.
To switch off the baby monitor, press the hang up key
.
