69
Do Not Disturb
telephone to turn it back on. This means that the WLAN
function can be enabled without having use a wired con-
nection to open the user interface.
Do Not Disturb
For every analog extension of the FRITZ!Box, the Do Not
Disturb option can be enabled by phone. When Do Not
Disturb is set, the telephone connected to the extension
will not ring. In configuring this function you can choose
between enabling the function immediately or selecting a
specific time period.
Immediately
When Do Not Disturb is enabled immediately, no incoming
calls will be signaled at the specified extension. The Do
Not Disturb setting will remain enabled until it is disabled.
Period
Alternatively, you can enter a Do Not Disturb period during
which the telephone will not ring. At the extension for
which a Do Not Disturb period is to be configured, define
the period during which the phone should not ring and
save your entries. Then enable Do Not Disturb. Do Not Dis-
turb then automatically will be switched on daily at the
time entered in the “Start” field and switched off again at
the time defined in the “End” field.
Example: Do Not Disturb should be configured from 20:00
p.m. until 07:00 a.m. daily. Enter the value “2000” for
<Start> and “0700” for <End>.
Enabling and Disabling WLAN
r96s1s
Enables the WLAN function.
r96s0s
Disables the WLAN function.
Enabling Do Not Disturb Effective Immediately
r81
<Ext.>
s0s
Immediately enables Do Not Disturb for
the extension entered as <Ext>.
r91ss
Saves the settings.