Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation Download

Page: 64 / 190

Disabling the USB Remote Connection

Enter

fritz.box

in the address field of the browser.

Enable the expert setting of the FRITZ!Box in the “Sys-
tem / Expert Mode” menu. Confirm by clicking “Ap-
ply”.

Click the “Home Network / USB Devices” menu. Se-
lect the “USB Remote Connection” page.

Install the program for the USB remote connection on
the computer from which you want to use the USB de-
vices. Follow the instructions on the “USB Remote
Connection” page.

Enable the setting “USB remote connection en-
abled”, then click the link “program for the USB
remote connection”.

The next step is to specify for which kind of USB de-
vices the USB remote connection should be enabled.
Enable the desired options.

As a final step, click “Apply”. All USB devices con-
nected to the FRITZ!Box will be detected again.

The result of the changed USB settings can be viewed in
the “Overview of Devices”.

Disabling the USB Remote Connection

Perform the following steps to disable the USB remote
connection:

Open a web browser on the computer for which the
USB remote connection is to be disabled.

Enter

fritz.box

in the address field of the browser.

Enable the expert setting of the FRITZ!Box in the
“System / Expert Mode” menu. Confirm by clicking
“Apply”.

Click the “Home Network / USB Devices” menu. Se-
lect the “USB Remote Connection” page.

Disable all types of USB devices.

As a final step, click “Apply”.

Summary of Contents for Box Fon WLAN 7340































































































































































































Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands

Fritz! Box Fon WLAN 7340, Installation, Configuration And Operation

Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands