Setting Up an IP Telephone in the FRITZ!Box
40
–
Call acceptance: Enter here whether the answer-
ing machine should react to all calls or only to
calls for certain numbers.
–
Remote inquiry, which can be used to pick up
messages from the answering machine from an-
other telephone line.
Setting Up an IP Telephone in the FRITZ!Box
Before you can use an IP telephone with the FRITZ!Box, it
must be set up. Follow the instructions below:
See also the manufacturer’s documentation for informa-
tion about how to set up your IP telephone.
1.
Open the FRITZ!Box user interface (see the section
“Opening the User Interface” on page 26).
2.
Enable the expert setting in the “System / Expert
Mode” menu.
3.
Click “Wizards / Manage Your Telephony Devices”
and then click “Configure New Device”.
4.
Select the option “Telephone (with or without an-
swering machine)” and then click “Next”.
5.
Select “LAN/WLAN (IP telephone)”, assign a name
and then click “Next”.
6.
Assign a password.
7.
Enter the password, the user name and the registrar
in your IP telephone. Be sure to consult the documen-
tation for your telephone on how to do this.
8.
Confirm the Telephony Wizard of the FRITZ!Box by
clicking “Next” and follow the instructions.
The IP telephone will be set up in the FRITZ!Box so that it
can be used to make telephone calls.
