Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation Download

Page: 14 / 190

Connecting

Connecting FRITZ!Box

This chapter contains instructions on the following topics:

•

connecting FRITZ!Box to electrical power

•

connecting one or several computers to the FRITZ!Box

•

connecting FRITZ!Box to DSL

•

connecting FRITZ!Box to ISDN or the analog telephone line

•

connecting analog terminal devices to the FRITZ!Box

•

connecting an IP telephone

3.1

Connecting to Electrical Power

Connecting to the power supply

Connecting

Set aside the power supply unit from the FRITZ!Box pack-
age.

Connect the FRITZ!Box to the power supply unit. In-
sert the small plug in the power socket at the right
edge of the socket strip on the FRITZ!Box.

Plug the other end into an AC power outlet.

The green “Power/DSL” LED will light up after a few sec-
onds to indicate that the device is ready for operation.

Please see the instructions about setting up the
FRITZ!Box in section “Security and Handling” on page 8.

INFO

WLAN

Festnetz

Festn

etz

Internet

Power

/ DSL

DSL

Summary of Contents for Box Fon WLAN 7340































































































































































































Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands

Fritz! Box Fon WLAN 7340, Installation, Configuration And Operation

Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands