Fritz! Box 7490 Installation And Operation Manual Download

Page: 188 / 197

FRITZ!Box 7490

188

Declaration of CE Conformity

The manufacturer

AVM GmbH
Alt-Moabit 95
D 10559 Berlin
Germany

herewith declares that the product

FRITZ!Box 7490
ADSL-WLAN router

complies with the following directives:

1999/5/EC

R&TTE Directive: Radio Equipment and Telecommunica-
tions Terminal Equipment

2009/125/EC

EU directive: ecodesign requirements for energy-related
products

2011/65/EU

EU directive: on the restriction of the use of certain haz-
ardous substances in electrical and electronic equip-
ment

The following norms were consulted to assess conformity:

- EN 60950-1:2006/A1:2010
- EN 55022:2010
- EN 55024:2010
- EN 301 489-1 v1.9.2
- EN 301 489-6 v1.3.1
- EN 301 489-17 v2.2.1
- EN 300 328 V1.7.1

- EN 301 406 V2.1.1
- EN 62311:2008

The CE symbol confirms that this product conforms with the
above mentioned norms and regulations.

Berlin, 17/03/2014

Peter Faxel, Technical Director

Indication of Countries

This device is designed for use in all countries of the European Union and in
Switzerland, Norway, Liechtenstein and Iceland.
For the frequency range of 5150 MHz to 5350 MHz, only indoor operation is
permitted.

Summary of Contents for Box 7490






































































































































































































Search results

Summary of Contents for Box 7490

Reviews:

Related manuals for Box 7490

Brands by name

Popular brands

Fritz! Box 7490, Installation And Operation Manual

Search results

Summary of Contents for Box 7490

Reviews:

Related manuals for Box 7490

Brands by name

Popular brands