Fritz! Box 7272 Installation And Operation Manual Download Page 115

Page: 115 / 195

Answering Machine

FRITZ!Box 7272

115

Operating an Answering Machine on the Telephone

The answering machine can be operated using a voice menu
on the telephone.

Press the following keys on the telephone:

Pick up the handset.

Follow the voice menu.

Or you can press a key right away; see the section

Voice

page 116

Operating the Answering Machine on FRITZ!Fon

You can operate the answering machine in the menu of your
FRITZ!Fon cordless telephones. For comprehensive instruc-
tions, see the current FRITZ!Fon manual on

en.avm.de/service/manuals/fritzbox

Picking Up a Call from the Answering Machine

If the answering machine has picked up a call and the caller
has not hung up yet, you can pick up the call on the tele-
phone:

Press the keys

s09

on the telephone.

Pick up the handset.

The call will be picked up.

Answering Machine

Keys

Answering machine 1

ss600

Answering machine 2

ss601

Answering machine 3

ss602

Answering machine 4

ss603

Answering machine 5

ss604

Summary of Contents for Box 7272




































































































































































































Search results

Summary of Contents for Box 7272

Reviews:

Brands by name

Popular brands

Fritz! Box 7272, Installation And Operation Manual

Search results

Summary of Contents for Box 7272

Reviews:

Brands by name

Popular brands