Fritz! Box 6840 LTE Configuration And Operation Manual Download Page 128

Page: 128 / 165

128

Taking FRITZ!Box out of Operation

In this chapter you receive tips and recommendations for taking the
FRITZ!Box out of operation.

20.1

Removing the SIM Card

If you want to end operation of the FRITZ!Box, remove the SIM
card from the card holder of the FRITZ!Box.

20.2

Restoring the FRITZ!Box Factory Settings

Restore the factory settings of the FRITZ!Box. This is strongly
recommended if you are planning to pass the FRITZ!Box on to
another user.

Resetting the FRITZ!Box has the following effects:

•

All settings you made in the FRITZ!Box are then deleted.

•

The factory settings’ WLAN key will be activated again.

•

The IP configuration of the factory settings will be re-
stored.

Restoring Factory Settings

In the FRITZ!Box user interface, select the “System / Re-
set” menu.

On the “Factory Settings” page, click the “Load Factory
Settings” button.

The FRITZ!Box is reset to its factory settings.

20.3

Uninstalling Software

Additional software for the FRITZ!Box is available on the web
pages of AVM at

www.avm.de/en/download

If you have installed supplementary programs on one or more
computers, uninstall the software using the control panel of
your Windows operating system.

Please also follow our instructions for the correct disposal of
waste equipment on

page 143

FB6840LTE-e2.fm Seite 128 Dienstag, 29. Mai 2012 5:34 17

Summary of Contents for Box 6840 LTE






































































































































































Search results

Summary of Contents for Box 6840 LTE

Reviews:

Related manuals for Box 6840 LTE

Brands by name

Popular brands

Fritz! Box 6840 LTE, Configuration And Operation Manual

Search results

Summary of Contents for Box 6840 LTE

Reviews:

Related manuals for Box 6840 LTE

Brands by name

Popular brands