Fritz! Box 3272 Installation And Operation Manual Download

Page: 91 / 137

Network Settings in the FRITZ!Box

FRITZ!Box 3272

IPv4 Settings in the FRITZ!Box

The IPv4 settings of the FRITZ!Box are preset upon delivery
with the following values:

The IP address and the corresponding subnet mask yield the
following values:

The following IPv4 addresses cannot be assigned because
they are reserved for certain purposes:

IP Address in Case of Emergency

The FRITZ!Box has a fixed IP address that cannot be changed.
The FRITZ!Box always can be reached at this IP address.

For instructions about how to handle fixed IP addresses, see
the section

Opening the User Interface Using an Emergency IP

Address

from

page 116

Factory Settings

IPv4 address

192.168.178.1

Subnet mask

255.255.255.0

DHCP server

enabled

Network address of the subnet

192.168.178.0

Entire IPv4 address range for the
computers

192.168.178.2 -
192.168.178.254

This IP address is used by the
FRITZ!Box itself

192.168.178.1

This IP address is the broadcast ad-
dress used to send messages into the
network

192.168.178.255

fixed IP address

169.254.1.1

Summary of Contents for Box 3272










































































































































Search results

Summary of Contents for Box 3272

Reviews:

Related manuals for Box 3272

Brands by name

Popular brands

Fritz! Box 3272, Installation And Operation Manual

Search results

Summary of Contents for Box 3272

Reviews:

Related manuals for Box 3272

Brands by name

Popular brands