FRITZ!Box 3272
34
Configuring the Internet connection over LAN 1: FRITZ!Box as a router
3.
Select the setting “Mobile connection enabled”.
4.
Configure the settings for your Internet connection over
the mobile communications network. For more informa-
tion, see the Online Help of the FRITZ!Box.
When the mobile communications function is used, the
FRITZ!Box user interface presents information about network
availability, connection status and throughput.
Once this function has been set up, the “Internet / Mobile
Communications” menu is always available, even when the
USB modem has been disconnected.
7.4
Configuring the Internet connection over LAN 1: FRITZ!Box as a
router
You can use the FRITZ!Box at an already existing Internet ac-
cess via the LAN 1 socket. To do this the FRITZ!Box is connect-
ed to the router or network. For this kind of connection the
FRITZ!Box can be configured as an independent router or as
an IP client in the existing network.
Configuring FRITZ!Box as a Router
You can configure the FRITZ!Box to work as an independent
router to provide a network with its own network address range.
1.
Connect the FRITZ!Box to the router / network with a cable
as described in section
.
2.
Open the FRITZ!Box user interface.
The “Mobile Communications” menu is not available
until the UMTS/HSPA modem has been connected to the
USB port of the FRITZ!Box.
Due to technical limitations on the part of the mobile com-
munications network providers, some restrictions may arise
for Internet telephone calls and for applications requiring an
incoming connection. The same is true for using port for-
warding, sharing USB storage memory, remote access via
HTTPS, dynamic DNS and VPN. Contact your network provider
for details on any restrictions that may apply.
Summary of Contents for Box 3272
Page 133: ...FRITZ Box 3272 133 ...
