Fritz! Box 3272 Page 14 Installation And Operation Manual Download

Page: 14 / 137

FRITZ!Box 3272

Connecting the FRITZ!Box

•

Connect the FRITZ!Box to the power supply.

•

Connect the FRITZ!Box to your Internet connection.

This chapter tells you how.

4.1

Connecting to Electrical Power

Connecting to the power supply

Pick up the power supply unit included in the FRITZ!Box
package.

Connect the power supply unit to the socket on the
FRITZ!Box labeled “Power”.

Plug the other end into an AC power outlet.

The “Power” LED begins flashing after a few seconds to indi-
cate that the FRITZ!Box is ready for operation.

Before you connect the FRITZ!Box, note the additional in-
structions in the section

Security and Handling

page 12

LAN 2

LAN 3

LAN 4

LAN 1

Info

DSL

LAN

Powe

Use only this power supply unit for connecting to electri-
cal power.

Summary of Contents for Box 3272










































































































































Search results

Summary of Contents for Box 3272

Reviews:

Related manuals for Box 3272

Brands by name

Popular brands

Fritz! Box 3272, Installation And Operation Manual

Search results

Summary of Contents for Box 3272

Reviews:

Related manuals for Box 3272

Brands by name

Popular brands