Setting Up the Wi-Fi Connection
Action
Illustration
1
Connect the FRITZ!Repeater to an outlet close to the FRITZ!Box
and wait until the
Connect
LED starts to flash slowly.
Connect
2
Start the connection to the FRITZ!Repeater: Press the
Connect
button. The
Connect
LED flashes quickly.
Connect
3
Start the connection on your FRITZ!Box:
•
FRITZ!Box with
Connect/WPS
,
Connect
or
WPS
button: Press
button briefly. The
WLAN
or
Connect
LED flashes.
•
On a FRITZ!Box with the
WLAN/WPS
or
WLAN
button: Press
the button for about 6 seconds until
WLAN
starts flashing.
•
On another wireless router, press the button that starts WPS.
within
2 minutes
4
As soon as the
Connect
LED on the FRITZ!Repeater lights up
permanently, the connection has been established.
If the
Connect
LED starts flashing slowly again, repeat steps 2
and 3 of these instructions.
Connect
When the connection has been established, reposition the FRITZ!Repeater.
Continue reading on
.
If the Wi-Fi connection cannot be established at the touch of a button, you will
find alternative instructions in the PDF manual at
en/avm.de/service
.
20
