FRITZ!Box 6810 LTE
74
Enabling the Baby Monitor
15.9
Enabling the Baby Monitor
When the baby monitor is enabled for a telephone, the tele-
phone automatically calls a previously specified telephone
number whenever the volume in the room reaches a defined
level. If the telephone is in the same room as your child, you
can use this function to monitor its sleep.
Enabling Baby Monitor
N
Pick up the handset or activate the speaker
phone function of your telephone.
We recommend using a device with a speaker
phone function.
s4
<Level>
s
<Telephone num-
ber>
r
Enables the baby monitor.
<Level>: Sound level at which a call is triggered.
Enter a numeral between
1
(the most sensitive
setting) and
8
.
<Telephone number>: The telephone number to
be called. Enter an internal telephone number
(see
), the number
9
for an internal
group call, or any external telephone number de-
sired.
Q
Wait for the second-long acknowledgement tone.
Do
not
hang up the handset!
The baby monitoring function is now enabled.
As soon as the volume in the room reaches the
specified level, the telephone will dial the tele-
phone number you entered. If you accept the
call, you are connected with the telephone where
the baby monitor is enabled.
A new call is initiated no less than one minute af-
ter the previous call.
You can disable the baby monitor at any time by
hanging up the headset.
Telephones on which baby monitoring is enabled can be
called internally (see
) so that you can listen in on
the room directly.
Summary of Contents for 6810 LTE
Page 150: ...FRITZ Box 6810 LTE 150 ...
