Fritz!Box 6810 LTE Installation And Operation Manual Download Page 14

Page: 14 / 150

FRITZ!Box 6810 LTE

Security and Handling

Handling the FRITZ!Box

•

Place the FRITZ!Box in a dry location that is free of dust
and protected from direct sunlight.

•

When connecting the FRITZ!Box to your computer using a
network cable, keep in mind that the cable can be no
longer than 100 m.

•

Use the alignment aid of the FRITZ!Box to determine the
best possible position of the FRITZ!Box for LTE reception.

The alignment aid is located in the FRITZ!Box user inter-
face in the “Internet / LTE Information” menu, on the
“Reception” page.

•

Make sure to keep sufficient distance from potential
sources of interference like microwave devices or elec-
tric devices with large metal housings.

Summary of Contents for 6810 LTE























































































































































Search results

Summary of Contents for 6810 LTE

Reviews:

Related manuals for 6810 LTE

Brands by name

Popular brands

Fritz!Box 6810 LTE, Installation And Operation Manual

Search results

Summary of Contents for 6810 LTE

Reviews:

Related manuals for 6810 LTE

Brands by name

Popular brands