User Interface and Display
FRITZ!Box 6810 LTE
113
22.3
User Interface and Display
•
Configuration and status messages via a web browser on
a connected computer
•
Five LEDs indicate the condition of the device
22.4
Physical Specifications
•
Dimensions (W x D x H): ca. 64 x 99 x 134 mm
•
Supply voltage: 230 V / 50 Hz
•
Maximum power consumption: 8 W
•
FRITZ!OS can be updated
•
Conforms to CE standards
•
Ambient conditions
–
operating temperature: 0 °C to +40 °C
–
storage temperature: -20 °C to +70 °C
–
relative humidity (operation): 10% – 90%
–
relative humidity (idle): 5% – 95%
22.5
Cable
Network Cable
The network cable (white) of the FRITZ!Box 6810 LTE is a stan-
dard category 5 (Cat 5) Ethernet cable. Please use a standard
STP-type (Shielded Twisted Pair) Ethernet cable of category 5
(Cat 5) to replace or extend the Ethernet cable. To extend the
cable you will need a shielded RJ45 double coupling (Cat 5)
with a 1:1 pin assignment. You can use both straight cables
and crosslink cables. All components are available from spe-
cialized vendors.
When components of a category smaller than Cat 5 are used,
reduced transmission rates may result.
AVM recommends using a network cable no more than
100 meters long.
Summary of Contents for 6810 LTE
Page 150: ...FRITZ Box 6810 LTE 150 ...
