n
Do not reuse damaged accessories.
n
Do not leave the Laboratory planetary mill running for several hours
without cooling phases. Risk of overheating!
n
The mill must never be left running unsupervised. In certain oper-
ating states, the vibrations may result in a shifting effect on the sur-
face.
2.6 Protective equipment
Protective equipment is to be used as intended and may
not be disabled or removed.
All protective equipment is to be regularly checked for
integrity and proper functioning.
For start-up, the hood (3) has to be closed.
The hood (3) is locked:
n
without mains connection
n
during operation
The hood (3) can only be opened, if the mill's drive is at
standstill.
2.6.1 Opening the hood without mains connection
NOTICE!
Use the emergency release only if a power failure or
damage to the device prevents normal opening. Only
open the emergency release gently and turn the trian-
gular key 180 degrees clockwise. Any other manner of
handling can damage the locking mechanism, rendering
the mill unusable.
Safety information and use
- 14 -
