4.5 Attaching the funnel
The jaw crusher is delivered without funnel (1) mounted. It must be
mounted prior to initial start-up.
1.
Take the funnel (1) and the hex wrench also provided (g) out of the
packaging.
2.
Lift the rubber seal (E) off the funnel opening of the jaw crusher. To
do this, remove the 4 countersunk head screws (D) using the hex-
agon socket wrench (g).
3.
Fit the rubber seal (E) on the funnel neck. Pay attention to the
position of the holes in the funnel (1) and the rubber seal (E). They
must lie on top of each other.
1 Funnel
g
Hex wrench (size 4)
Installation
- 21 -
