8.3.7 Sealing rings
Rinse the seal rings under particle-free, running water and then dry them
with lint-free soft tissue.
8.3.8 Mounting the wet measuring cell
Once you have cleaned the parts, you have to re-install the measuring
cell.
To assemble the measuring cell, follow the same steps in reverse order:
1.
Insert the flow plate. Make sure that the base body is seated prop-
erly in the measuring cell.
2.
Insert the locking plate in the front and lock it with the dial.
3.
Clamp in the wet measuring cell with the latch clamp on the oppo-
site side.
The wet measuring cell is thus cleaned and can be re-inserted in
the measuring unit.
Cleaning
- 43 -
