4
Initial start-up
4.1 Connections for measuring unit
The following connections are located on the back of the measuring unit:
1 Connections for dispersion units
2 24V mains connection
3 USB port for connecting the measuring unit to the computer
Do not connect the USB cable between measuring unit
and computer until after the driver software is installed.
Only then switch on the device.
4.2 Connections for supply units
4.2.1 Wet dispersion unit
The following connections are located on the left side of the wet disper-
sion unit:
1 Connection, measuring unit
2 Outlet
3 Connection for external pump
4 Inlet for liquids
5 Connection for measuring unit (only if the ultrasonic
box is used)
6 Mains connection socket (only if the ultrasonic box is
used)
Initial start-up
- 22 -
