Frigidaire GRFC2353AD Page 30 Use & Care Manual Download

Page: 30 / 52

Ice Maker Operation & Care

After the refrigerator is installed properly,

the ice maker can produce ice within

24 hours. When using the ice maker

for the first time, and in order for it to

work properly, it is necessary to clear

air from the water tubing and the filter.

Furthermore, if the system is not flushed,

the first ice cubes may be discolored or

have an odd flavor. Once the ice maker

begins making ice, allow the bin to fill

completely, then discard the first FULL

bin of ice.

Ice Maker and Storage Bin

Capacity

This ice maker should produce between

2 and 2.5 pounds of ice per 24 hours

depending on usage conditions. For a

Standard Depth unit, the ice bin should

hold around 12 pounds of ice. For a

Counter Depth unit, the ice bin should

hold around 9 pounds of ice.

Turning the ice maker on and off

Press power button to turn Ice Maker on

(button will not illuminate).

Freezer Ice Maker



NOTE

The ice maker will only produce the ad-

vertised production rate if the product

is set at 0

CAUTION

If the water supply to your refrigerator

is softened, be sure the softener is

properly maintained. Chemicals from

a water softener can damage the ice

maker.

Ice maker tips

• The following sounds are normal

when the ice maker is operating:

- Motor running

- Ice dropping into ice bin

- Water valve opening or closing

- Running water

• Ice cubes stored too long may develop

an odd flavor. Empty the ice bin as

explained below.

ICE MAKER

Freezer Ice Maker



NOTE

The Freezer Ice maker fills from the

back left-hand corner of the bin.

Moving the ice to the edges of the bin

allows the bin to fill completely.

on off

Summary of Contents for GRFC2353AD





















































Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands

Frigidaire GRFC2353AD, Use & Care Manual

Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands