Frigidaire GRFC2353AD Page 2 Use & Care Manual Download

Page: 2 / 52

INTRODUCTION

Doors

Handles are secure and tight

Door seals completely to cabinet on

all sides

Leveling

Refrigerator is level side-to-side and

slightly elevated in front to assist with

door and drawer closing (front should

be higher than back)

Cabinet is setting solid on all corners

Electrical Power

House power turned on

Refrigerator plugged in

Ice Maker(s)

House water supply connected to

refrigerator.

WARNING: Potable water supply

only.

No water leaks present at all

connections - recheck in 24 hours

Ice maker(s) is/are turned ON

Ice & water dispenser operates

correctly

Final Checks

Shipping material removed

Refrigerator and freezer temperatures

set

Registration card sent in

Installation Checklist



Welcome to our

family

Thank you for bringing Frigidaire into

your home! We see your purchase as the

beginning of a long relationship together.
This manual is your resource for the use

and care of your product. Please read

it before using your appliance. Keep it

handy for quick reference. If something

doesn’t seem right, the troubleshooting

section will help you with common issues.
FAQs, helpful tips and videos, cleaning

products, and kitchen and home accessories

are available at www.frigidaire.com.
We are here for you! Visit our website,

chat with an agent, or call us if you need

help. We may be able to help you avoid

a service visit. If you do need service, we

can get that started for you.
Let’s make it official! Be sure to register

your product.
Keep your product info here so it’s easy

to find.
Model Number
Serial Number
Purchase Date

Serial Number Location

Summary of Contents for GRFC2353AD





















































Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands

Frigidaire GRFC2353AD, Use & Care Manual

Search results

Summary of Contents for GRFC2353AD

Reviews:

Related manuals for GRFC2353AD

Brands by name

Popular brands