background image

WITH YOUR

FRIGIDAIRE GALLERY DISHWASHER

BEFORE YOU START

Your dishwasher controls 

To begin using your dishwasher, open the door and select one of the cycle options from the control panel. The 

Wash and Dry settings can be adjusted based on the cycle chosen. Indicator lights  

illuminate as each cycle or option is selected.

• 

Select cycles and options with the door open. Press 

START immediately before closing the door.

• 

To add an item, press START again immediately  

before closing the door to resume the cycle.

• 

Load rack so large items do not block the spray  

arm or detergent dispenser.

REMEMBER

YOU’RE IN CONTROL

† Cycle uses a soil sensing feature to determine the best wash 

performance. The soil sensing feature automatically engages 

when selecting the HEAVY, NORMAL, TOP RACK or ENERGY 

SAVER wash cycles.

Set up your dishwasher

 

Make sure the top rack, bottom rack and silverware basket are in place prior to  

operating the dishwasher. See 

OPERATING INSTRUCTIONS

 in the Use & Care Manual.

Fill Rinse Aid dispenser

 

Rinse aid greatly improves drying and reduces water spots. Twist off the rinse aid  

dispenser cap and fill until the indicator reaches full, then replace the cap.

If installed with a garbage disposal

 

Ensure the knock-out plug is removed so the dishwasher can properly drain. See the Installation  

Instructions for further details.

1

2

3

4

5

6

7

8

1.  Select HEAVY WASH† for heavily soiled loads of pots, pans, 

casserole dishes and dinnerware.

2.  Select NORMAL WASH† for light to heavily soiled loads.
3.  Select QUICK WASH (34 minutes) for lightly soiled loads only.
4.  Select CHINA CRYSTAL for lightly soiled China, Crystal or 

other delicate items.

5.  Select TOP RACK† for light to heavily soiled small loads in the 

upper rack. 

6.  ENERGY SAVER† uses less energy by washing lightly soiled 

loads with less water and the air dry setting. 

7.  Select RINSE ONLY for rinsing dishware that will be washed later.
8.  The FAVORITE CYCLE program saves preferred cycle and 

options to a one touch control. See Use & Care Manual for more 

information.

9.  START/Cancel starts or cancels a cycle. To start the cycle, 

press START/Cancel button and immediately close the 

dishwasher door. To cancel the cycle, open the dishwasher 

door and press the START/Cancel button until the cycle and 

option LEDs turn off.

10. The STATUS WINDOW displays remaining time in cycle, delay 

time setting or “close door” reminder.

11.  The INDICATOR LIGHTS provide cycle status information 

showing Delayed (delay start)/, Clean (clean non-sanitized) and 

Sanitized (clean with sanitized option).

9

10

11

14

15

12

13

12.  WASH PRESSURE provides the choice of Scour (extra heavy 

soil), Surge (heavy to normal soil) or Spray (light soil).

13.  WASH TEMP provides the choice of Sanitize, High or Normal 

water temperature.

14. DRY provides the choice of MaxBoost™ (extended dry time), 

Heat (normal dry time) or Air (air dry only). Press and hold 

the Dry button until the lock icon comes on to lock the 

dishwasher controls. Press and hold the Dry button until the 

lock icon goes off to unlock the controls.

15.  DELAY TIME sets a delayed starting time to begin the wash 

cycle from 1-24 hours.

GETTING

started

A23320501A (2110)

Reviews: