7
OPERATING INSTRUCTIONS
Status Window
The STATUS window, available on some models, indicates the following activity:
1-24 . . . . . . . Number of delay start hours.
The last hour will count
down in
minutes.
MINUTES . . . . Number of minutes left in
cycle (1-199).
L0----L6 . . . . . Level of Rinse Aid dosage.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5
min. does not resolve the problem,
contact the Frigidaire Customer Care Center at 1-800-944-9044.
User Instruction Code
Error Code
CLOSE . . . . . . Close will scroll across the
status window indicating the
door needs to be closed.
PRESS START . Press start will scroll across
the status window indicating
the START/CANCEL pad needs
to be pressed.
Displayed
Error Code*
Problem
Solution
i10
A low fill has been
detected.
Look for a pinched water supply line, or water shutoff
is not completely opened.
i20; i40; iF0
Clogged filters or a
restricted drain line has
been detected.
Check and clean both filters and sump area and check
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug
has been removed.
i30
A leak or overflow of
water has been detected
in the bottom pan.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled.
i50
A problem has been
detected with the drain
or wash motor.
Pressing the cancel button or turning power off at the
breaker for 5 min. should clear this error code and the
unit can be restarted.
If this does not resolve the problem, service will
need to be called.
i60
A problem has been
detected with the water
heating system.
iC0
A problem has been
detected with the
electronic control system.
Instruction
Code Displayed
Problem
Solution
Close
This indicates the door
has been left open or
not properly latched.
Ensuring the door is properly latched will clear the
display. This does not indicate a problem with your
dishwasher and service will not need to be contacted.
