4
FEATURES AT A GLANCE
Features may vary according to model
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms
against soiled surfaces.
First, the dishwasher drains for a few seconds to remove soils dropped while
loading, then fills with water covering the filter area.
Water is then pumped through the spray arms.
Soil particles go through and across the filter and down the drain as the water is pumped out.
This
series of steps are repeated as needed.
The number of water fills varies with the cycle being used.
Tub Gasket
Middle Spray
Arm
Lower Rack
Cup Shelves
Lower Spray
Arm
Detergent
Dispenser
Rinse Aid
Dispenser
Upper Spray Arm
Upper Rack
Silverware
Basket
Filter
Serial Label
(located on
right side of
door)
Soft Grip
Rack
To Start a Cycle
When cycle and options are selected, LEDs of
selected cycle and options are illuminated. The
status window displays the cycle time and then
displays ‘Press Start’.
To start the cycle, press START/CANCEL and close
the dishwasher door immediately.
The status window displays ‘Close’ after the
START/CANCEL pad is pressed.
A tone will sound indicating the cycle is
successfully started after door is closed.
