8
DOOR REMOVAL INSTRUCTIONS - STYLE 1
Door
Water
Line
Tubing
Screws
Hinge
Assembly
To Remove Freezer Door:
1. Disconnect water line coming from lower
hinge of freezer door at connection lo-
cated under front of freezer: Press outer
ring against face of fitting, then pull to
remove tube.
2. Remove top hinge cover screw on freezer
door and remove cover.
3. Disconnect wiring harness connector
plug at top hinge: place your thumbs on
flat sides of each connector and bend
both parts back and forth, then with firm
grasp, pull both pieces apart.
4. Trace around hinge with soft lead pencil.
This will make it easier to realign doors
when they are replaced.
5. Remove top hinge, allowing wiring har-
ness to pull through hinge and lift freezer
door off of bottom hinge pin. Lay door
down flat to avoid kinking water line.
6. Remove bottom hinge, if necessary.
7. Reverse this procedure to reinstall
freezer door.
When both doors have been reinstalled, con-
nect water line by inserting tube and push until
mark touches face of fitting, replace toe grille
and plug in electrical power cord. Turn both
temperature controls to center position. Adjust
settings as necessary.
To Disconnect
1. Press outer ring against face of
fitting
2. Pull to
remove tube
Insert tube and push until mark
touches face of fitting
To Connect
