background image

20

IMPORTANT

If you store or move your refrigerator in freezing temperatures, be sure to completely drain the water supply system. Failure to do so 

could result in water leaks when the refrigerator is put back into service. Contact a service representative to perform this operation. 

CAUTION

•  Pull the refrigerator straight out to move it. Shifting it from side to side may damage flooring. Be careful not to move the 

refrigerator beyond the plumbing connections.

•  Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.

NOTE

If you set your temperature controls to turn off cooling, power to lights and other electrical components will continue until you 

unplug the power cord from the wall outlet.

Protecting your investment

Keeping your refrigerator clean maintains appearance and prevents odor build-up. Wipe up any spills immediately and clean the 

freezer and fresh food compartments at least twice a year. When cleaning, take the following precautions:

  •  Never use CHLORIDE or cleaners with bleach to clean stainless steel.
  •  Do not wash any removable parts in a dishwasher. 
  •  Always unplug the electrical power cord from the wall outlet before cleaning.
  •  Remove adhesive labels by hand. Do not use razor blades or other sharp instruments which can scratch the appliance surface. 
  •  Do not remove the serial plate.

Do not use abrasive cleaners such as window sprays, scouring cleansers, brushes, flammable fluids, cleaning waxes, concentrated 

detergents, bleaches or cleansers containing petroleum products on plastic parts, interior doors, gaskets or cabinet liners.  Do not 

use paper towels, metallic scouring pads, or other abrasive cleaning materials or strong alkaline solutions.

CArE & CLEANING

Care & Cleaning Tips

Part

What To Use

Tips and Precautions

Interior & Door 

Liners

Soap and water

• 

Baking soda and water

• 

Use 2 tablespoons of baking soda in 1 quart of warm water. 

Be sure to 

wring excess water out of sponge or cloth before cleaning around 

controls, light bulb or any electrical part.

Door Gaskets

Soap and water

• 

Wipe gaskets with a clean soft cloth.

Drawers & Bins

Soap and water

• 

Use a soft cloth to clean drawer runners and tracks.

Glass Shelves

Soap and water

• 

Glass cleaner

• 

Mild liquid sprays

• 

Allow glass to warm to room temperature before immersing in warm water.

Toe Grille

Soap and water

• 

Mild liquid sprays

• 

Vacuum attachment

• 

Vacuum dust from front of toe grille.  Remove toe grille (see Installation 

Instructions). Vacuum backside, wipe with sudsy cloth or sponge.  Rinse 

and dry.

Exterior & 

Handles

Soap and water

• 

Non Abrasive Glass Cleaner

• 

Do not use commercial household cleaners containing ammonia, bleach or 

alcohol to clean handles.  Use a soft cloth to clean smooth handles.  

DO 

NOT use a dry cloth to clean smooth doors.

Exterior & 

Handles

(Stainless Steel 

Models Only)

Soap and water

• 

Stainless Steel Cleaners

• 

Never use CHLOrIDE or cleaners with bleach to clean stainless steel.

Clean stainless steel front and handles with non-abrasive soapy water and 

a dishcloth.  Rinse with clean water and a soft cloth.  Use a non-abrasive 

stainless steel cleaner.  These cleaners can be purchased at most home im-

provement or major department stores.  Always follow manufacturer’s in-

structions.  Do not use household cleaners containing ammonia or bleach.

NOTE:  Always clean, wipe and dry with the grain to prevent 

scratching.

  Wash the rest of the cabinet with warm water and mild liquid 

detergent.  Rinse well, and wipe dry with a clean soft cloth.

replacing Light 

Bulbs

Unplug refrigerator

• 

Wear gloves 

• 

Remove light cover

• 

Replace old bulb 

• 

Replace light cover

• 

Plug in the refrigerator

• 

CAUTION:  Wear gloves when replacing light bulbs to avoid get-

ting cut.

Use same wattage when replacing bulb

Summary of Contents for FFHS2311L
























Reviews: