Frigidaire FFFW5000Q Use And Care Manual Download Page 4

4

IMPORTANT SAFETY INSTRUCTIONS

Grounding type

Grounding type
wa

wall receptacl

ll receptacle

Po

Power cord with

wer cord with

3-prong 

3-prong  gr

grounded plug

ounded plug

Do not,

Do not, under

under

an

any cir

y circumstances,

cumstances,

cut,

cut, remo

remove

ve,

or b

or bypass th

ypass the

gr

grounding pr

ounding prong.

ong.

PREVENT INJURY
•  To prevent shock hazard and assure stability during 

operation, the washer must be installed and electrically 

grounded by a qualifi ed service person in accordance 

with local codes. Installation instructions are packed in 

the washer for installer’s reference. Refer to 

INSTAL-

LATION INSTRUCTIONS for detailed grounding 

procedures. If the washer is moved to a new location, 

have it checked and reinstalled by a qualifi ed service 

person.

•  To prevent personal injury or damage to the washer, 

the electrical power cord must be plugged into a 

properly grounded and polarized 3-prong outlet. The 

third grounding prong must never be removed. Never 

ground the washer to a gas pipe. Do not use an exten-

sion cord or an adaptor plug.

•  Follow package directions when using laundry products. 

Incorrect usage can produce poisonous gas - resulting 

in serious injury or death.

•  Do not combine laundry products for use in same load 

unless specifi ed on the label.

•  Do not mix chlorine bleach with ammonia or acids such 

as vinegar.

PREVENT INJURY AND DAMAGE TO THE APPLIANCE
To prevent serious personal injury and damage to the 

washer:
•  All repairs and servicing must be performed by an au-

thorized servicer unless specifi cally recommended in this 

Use & Care Guide. Use only authorized factory parts. 

•  Do not tamper with controls.
•  Do not install or store the washer where it will be 

exposed to the weather.

•  Do not install on carpet. Install washer on a solid fl oor. 

It may be necessary to reinforce the fl oor to prevent 

vibration or movement.

•  Do not sit on, step on or stand on the washer. Do not 

rest heavy loads on top. The washer is not meant to 

support weight.

•  To reduce the risk of electric shock, disconnect this 

appliance from the power supply before attempting 

any user maintenance. Canceling a cycle or turning the 

power off at the console does not disconnect this appli-

ance from the power supply.

•  To prevent injury, do not reach into the washer while 

parts are moving. Before loading, unloading or adding 

items, press cancel button to stop the cycle. Allow the 

wash tub to coast to a complete stop before reaching 

inside.

•  This washer is equipped with an electrical overload 

protector. The washer motor will stop if it becomes 

overheated.

•  Failure to comply with these warnings could result in 

serious personal injuries.

WARNING

FIRE/ELECTRICAL SHOCK HAZARD

Avoid fi re hazard or electrical shock. Do not use an 

adaptor plug or extension cord or remove grounding 

prong from electrical power cord. Failure to follow this 

warning can cause serious injury, fi re or death.

WARNING

HARMFUL VAPOR HAZARD

Do not use or mix liquid chlorine bleach with other 

household chemicals such as toilet cleaners, rust 

removers, acid or products containing ammonia. These 

mixtures can produce dangerous fumes which can 

cause serious injury or death.

Summary of Contents for FFFW5000Q

























Reviews: