Frigidaire FEB34S5ABA, User Manual

Page: 1 / 8

1
Bake
Clean Broil
Stop
Time
Timer
On/Off
Clock
Bake
Time Clear
Off
Oven
Preheat
Door Locked
Self-Cleaning Oven
ELECTRONIC OVEN CONTROL
Control Pad Functions
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note : The graphics on your timer may not look exactly like those
shown. This doesn't change the way it operates.
Note: The oven function will not work if the time of day clock is not set.
318200191 (0104) Rev. A
The oven can be programmed to:
Bake normally, Time Bake, Broil, Self-Clean
Note: Push buttons or pads may be shaped differently.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed
for silent operation. Push and hold STOP TIME pad. After 7 seconds, the control will beep once. This will block the controls
from sounding when a pad is pushed. To return the sound, push and hold STOP TIME pad again for 7 seconds until 1
beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push BROIL pad. "- - - " appears in the display.
2. Push and hold the UP ARROW pad until "HI" appears in the display.
3. Push and hold BROIL pad until °F or °C appears in the display.
4. Push UP or DOWN ARROW pad to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
Bake Pad - Used to
enter the normal
baking mode
temperature.
Broil Pad - Used to
select the variable
broil function.
Clean Pad - Used to
select the self-
cleaning cycle.
Clear Pad - Used to clear any function previously
entered except the time of day and minute timer.
Push Clear pad to stop cooking.
Up and Down arrow pads - Used along with the
function pads to select oven temperature, cooking time,
stop time (when programming an automatic stop time),
time of day, clean time and minute timer.
Clock Pad - Used to
set the time of day.
Feature indicator
lights - These light
to show which
feature is in use.
Bake Time Pad -
Used to enter the
length of the baking
time.
Stop Time Pad -
Used to set the
desired stop time
for baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
Timer Pad - Used to set or
cancel the minute timer.
The minute timer does not
start or stop cooking.
Oven, Preheat & Lock lights - The "oven" light will glow each time the oven
unit turns on maintain the set oven temperature. The "Preheat" light will glow
when the oven is first set to operate, or if the desired temperature is reset
higher than the actual oven temperature. The "Lock" light will flash until the
door locks when the self-clean cycle is in use. It glows constantly after the
door locks.