Frigidaire Affinity 6000 Series, Service Manual, Page: 70 / 74

Section 5 Troubleshooting
5-2
Residue or powder
on dark items;
stiff, harsh fabrics.
Wrinkling
Yellow buildup of
body soil on
synthetic fabrics
Yellow or brown
rust
stains.
1. Increase water temperature using hottest
water safe for fabric.
2. Do not overload washer.
3. Use liquid detergent or use nonprecipitating
water conditioner with nonphosphate
granular detergent.
1. Reduce load size.
2. Rinse in cold water with liquid fabric softener
using the Perm Press or Delicate cycle.
3. Remove items from washer as soon as cycle is
completed.
1. Soak in detergent booster or product containing
enzymes.
2. Wash in hot water (120°F/49°C) using full
permanent press cycle. Increase detergent.
Add bleach or treat with color remover.
1. To restore discolored load of whites, use
rust remover safe for fabric.
2. Do not use chlorine bleach to remove
rust stains. It may intensify discoloration.
3. Use nonprecipitating water softener.
4. Before washing, run hot water for a few
minutes to clear lines.
5. Drain water heater occasionally.
6. For an ongoing problem, install an iron filter
in the water supply system.
Problem
Correction
1. Undissolved detergent.
2. Some nonphosphate granular
detergents can combine with
hard water minerals to form a
residue.
3. Overloading the washer.
1. Overloading the washer.
2. Incorrect wash cycle for
wash load.
1. Agitation time too short.
2. Wash water temperature too
low.
3. Not
enough detergent.
1. Iron or manganese in water
supply, water pipes, or water
heater.
Cause