
Section 4 Component Teardown
4-7
Electronic Control Board Removal
1. Disconnect the washer from the electrical supply
and remove the console.
2. Lay the console on a soft flat surface, remove the
(5) screws holding the control to the console.
(See
Figure
4-24)
3. Lift the control out of the console.
Delay Start Button Removal
1. Disconnect the washer from the electrical supply
and remove the electronic control.
2. With the electronic control removed the delay start
button will lift out. (See Figure 4-25)
When handling and or replacing a control board it is
important the a technician have a wrist ground strap
on and connected to the cabinet or another grounding
position to prevent static electricity from damaging the
board.
NOTE
Figure 4-24.
Figure 4-25.
Figure 4-27.
Removing the interface board
1. Disconnect the washer from the electrical supply
and remove the electronic control.
2. With the electronic control removed the interface
board will lift out. (See Figure 4-26)
Removing the selector knob
1. Disconnect the washer from the electrical supply
and remove the electronic control.
2. Using a pair of pliers squeeze the knob shaft and
pull the knob out the front of the control panel.
(See Figure 4-27)
Figure 4-26.
Screws
Summary of Contents for Affinity 6000 Series
Page 2: ......
Page 28: ...Section 2 Installation Information 2 10 Notes ...