19
Step two: install
wall bracket
Installation of indoor unit
Step one: choosing installation location
1. Hang wall bracket, install center screw and apply level.
2. If required pre-drill in the locations you've chosen for mounting, install required
mounting hardware and secure to wall.
1. Choose the position of piping hole according to the direction of outlet pipe. The
position of piping hole should be a little lower than the wall-mounted frame,
shown as below.
Step three: open piping hole
Left
Wall
3"
Right
Mark center location
Level
Rear piping hole
Wall
Space
to the
wall
above
6 in
Space
to the
wall
above
6 in
3"
Rear piping hole
Left
Wall
3"
Right
Mark center location
Level
Rear piping hole
Wall
Space
to the
wall
above
6 in
Space
to the
wall
above
6 in
3"
Rear piping hole
18K
24K
2. Drill hole through wall with a diameter of 3" on the selected location. In
order to drain smoothly, slant the hole on the wall slightly downward to the
outdoor side with the gradient of 5-10°.
