SIRe Advanced Fan Heater Water
31
GB
Main menu
Fan control
Current settings
Temperature settings
Main menu>Temperature
settings
Room temp. day
Room temp. night
Main menu
System on/off
Fan control
Installer menu
Main menu>Installer menu
Enter password
(See manual)
0 0 0
0
Main menu
Installer menu
Fan control
System on/off
Main menu>System on/off
System on/off
•
ON
Main menu
System on/off
Temperature settings
Fan control
Main menu>Fan control
High speed limit
Main menu>Fan control
High speed limit
•
Step 5
Main menu
Fan control
Current settings
Temperature settings
20°C
18°C
Current settings
Room temp. day
Room temp. night
High speed limit
Week program
Step 5
No program
Main menu
Current settings
Displays set room temp, high speed limit and
week program status.
Temperature settings
Set the desired room temperatures to apply
for day respectively night mode, when the
door is closed (room temperature night is
used for week program/night reduction).
Factory setting
Room temp. day: 20°C (5 – 35°C)
Room temp. night: 18°C (0 – 20°C)
Fan control
Possibility of limiting high speed mode. In
Auto mode (see fan settings) the fan high
speed limit is set automatically to step 4 in
order to keep the sound level down. If you
wish to further restrict the fan control it can
be done here.
System on/off
Switch the whole unit off manually. In Off the
display goes out; as soon as a button is pushed
the display lights and shows System on/off. To
activate the unit again select On.
The unit’s safety functions are still active
when the system is switched off, which means
that the fan can continue to run for a moment
after mode Off has been selected.
Installer menu
The installer menu is at the bottom of the
main menu, this is password protected. See
Installer menu in this manual.
Factory setting
High speed limit: 5 (1-5)
