Frico Infraduo IHD17, Assembly And Operating Instructions Manual, Page: 4 / 8

Infraduo IHD
4
GB
voltage must be switched off to make sure
that the wiring is dead!
Only switch on the appliance when
installation is complete.
SWITCHING ON FOR THE FIRST TIME
• After switching on the appliance for the
first time and following extended periods
on non-use, the appliance may smell for a
short time.
CLEANING
• First, disconnect the equipment from the
power supply system!
• After the appliance has cooled down, the
housing can be wiped dry.
• Do not touch the quartz rods with your
fingers, since stains could build up from
such a contact.
• The reflector should be cleaned regularly
• Do not use any abrasive or caustic cleaning
agents!
• Never immerse the appliance in water!
Danger to life!
AFTER-SALES SERVICE
• All repairs must be referred to authorised
personnel! Therefore, you should contact
your specialized dealer or the customer
service.
Important! Any tampering with the
appliance will invalidate the warranty.
• Repairs carried out improperly and by
unqualified persons may have serious
consequences for the user!
TECHNICAL DATA
Rated voltage: 230 V/50 Hz
Rated output: 1650+7W / 2000+7W
Dimensions (LxWxD): 82,5x9,5x12,5 cm
Weight about: 3,35 kg
Protective system IP65